Vmware Host Patch Download

In a previous post, I wrote about how one can go about patching ESXi from the command line using the esxcli software vib command. This is all well and good when you only have a couple of hosts at hand. What would you do instead when faced with a significant number of hosts you need to update? The short answer is, use vSphere Update Manger (VUM). I’ve written about VUM in the past, so I’m skipping the how to install and configure it bits. If you’d like to learn more, have a look at these:

One of the features I like most about vCSA 6.5, is that VUM comes readily installed with the appliance, something that was on everybody’s wishlist since the appliance first shipped out. If you’re running vCenter Server for Windows, well, you’re stuck with installing VUM manually.

Patch VMware ESXi hosts by command line February 28, 2017 February 15, 2017 There a several ways to patch a VMware ESXi server. VSphere Update Manager (VUM) can update for example a complete ESXi host cluster fully automatic. VSphere Update Manager requires a vCenter Server. Select patches you want to download. (they are cumulative). Step 2: Download the ZIP file and upload it to a datastore (via vsphere C# client or via WinSCP for example) that is reachable for the host you want to patch (it can be local or shared datastore) > Bring the host into the maintenance mode > Connect with SSH (via Putty for example or through Firefox and FireSSH) to your ESXi host.

Today, I’ll be using vCenter Server Appliance 6.5 to update an ESXi 6.5 GA host to 6.5.0 d. The 4-part update process is as follows:

  • Import an ESXi image to VUM
  • Create a baseline
  • Attach the baseline
  • Remediate

vSphere Update Manager

Update Manager comes as a vCenter plug-in which is accessible from a number of places within vSphere Web client. To load it, click on the Update Manger icon from the Home screen or simply select the vCenter Server hostname in Navigator and change over to the Update Manger tab. The interface consists of two main views, Admin and Compliance. The Admin view allows you to configure various aspect of VUM itself as well as manage baselines, the patch repository and ESXi images. The Compliance view, on the other hand, is where you carry out tasks such as attaching baselines, scanning for applicable updates and remediating.

Figure 1 – The Update Manager icon on the Home screen in vSphere Web Client

How to import an ESXi image

So, the first thing we need to do to update ESXi via VUM, is to download the respective image from my.vmware.com and import it to Update Manager.

Step 1 – Highlight the vCenter Server name in Navigator, select the Update Manager tab and click on the Go To Admin View button.

Figure 2 – Changing to VUM’s Admin view in vSphere Web client

Step 2 – Once in Admin view, select the ESXi Images tab and click on Import ESXi Image. Doing so, loads another dialog box where you specify the ESXi image (ISO file) you want imported. Click on Browse and navigate to the folder where the image is stored. Select the ISO file and click OK. The file will upload as shown in Fig. 3. The upload progress bar, shows the remaining time and the speed at which the file is being uploaded.

Step 3 – Once the ISO is uploaded, details about the ESXi image are displayed as per Figure 4.

Figure 4 – Product and version details for the ESXi image just imported

Creating a baseline

Step 4 – Next, we create what’s called a Host Baseline. To do this, we simply right-click on the image just imported and select Create baseline as shown in Figure 5.

Step 5 – Type in a name for the baseline and press OK. The baseline should now be listed under the Hosts Baselines under Custom as per Fig. 6.

Figure 6 – The freshly created baseline as listed under the Hosts Baselines screen

Attaching a baseline

Step 6 – We’re almost there. The idea now is to attach the baseline to one or more hosts. We then run a compliance check to determine if the upgrade or update is actually required. To do this, one must change over to Compliance view. Just hit the Go to compliance view button at the top-right corner as shown in Fig. 7.

The baseline can in fact be attached to a number of objects including a datacenter, cluster or an individual ESXi host. This is what allows you to patch multiple hosts. It is important to note though that you may inadvertently hit hosts not earmarked for updates so be careful when attaching baseline to higher level objects.

In the example that follows, I’ve attached the baseline to one of three ESXi hosts forming a cluster.

Figure 8 – Attaching a baseline to a host

Step 7 – Next, we carry out a scan on the host to verify that the update/upgrade is in fact required. From the same screen, click on Scan for Updates and select Upgrades on the dialog that pops up followed by OK. This will initiate a scan the results of which are displayed under the Compliance Status column after the scan completes.

As expected, the host is found to be non-complaint, meaning that the 6.5.0d update is in fact applicable.

Figure 10 – A non-compliant result indicates that the host is missing one or more updates

How to remediate the host

In this case, remediating is the act of pushing a patch or update to an ESXi host. A host is remediated by clicking on the Remediate button. Alternatively, right-click on the ESXi hostname (or IP address) in Navigator and select Remediate from the Update Manager menu.

Figure 11 – Remediating a host from the context menu

Step 1 – The remediation process starts by selecting the baseline image you want applied. In this case, I’ve selected the one created for the 6.5.0d upgrade.

Figure 12 – Remediation Step 1 – Select the baseline applied

Step2 – Next, select the host you wish to remediate. In this case, only one host is listed which is the one highlighted in Navigator. If say, the baseline had been attached to a cluster, then you’d have all the hosts within that cluster listed as target objects.

Figure 13 – Remediation Step 2 – Selecting the target to remediate

Step 3 – Accept the EULA by ticking the box at the bottom.

Figure 14 – Remediation Step 3 – Accept the End User License Agreement

Step 4 – The next screen, gives you the option to postpone remediation tasks to a later date and time. You can also set the task to ignore warnings in reference to unsupported devices and such.

Figure 15 – Remediation Step 4 – Scheduling the remediation task (Optional)

Step 5 – In all probability, the ESXi being remediated will be hosting VMs. This screen gives you control over what happens to the VMs currently powered on. You can choose to have them powered off, suspended or leave them in their current state. Like it or not, powered on VMs must be migrated or shut down for the remediation process to complete. Your options are to migrate VMs manually to some other host or simply power them off prior to remediating. Alternatively, set the VMs to power down by selecting the Power Off virtual machines option from the VM Power State drop-down box as shown in Fig. 16. You can also set the task to disconnect removable media from any hosted VMs as this may cause the remediation task to stall.

Figure 16 – Remediation Step 5 – Configuring the host remediation options

Step 6 – If the host being remediated is a cluster member, you can control various aspects related to clustering as shown in Fig. 17. Further details on each setting are available here.

Figure 17 – Remediation Step 6 – Configuring the cluster remediation options

Step 7 – The Pre-check Remediation tasks runs a series of checks and generates a report of what exactly is carried out on the host. Press Finish to initiate the remediation task.

Figure 18 – Remediation Step 7 – Completing the remediation task

Download Vmware Esxi Patches

The remediation task’s progress is displayed in the Recent Tasks window in vSphere Web client.

Mountain host patch

The host should enter maintenance mode and later disconnect while the update is being applied. It should then reboot and re-connect automatically, assuming the remediation processes succeeded in updating the host.

1st Step Host Patch Exe

Figure 20 – A host is disconnected while being updated as can be seen in vSphere client and DCUI

Once remediation completes, you can easily verify that the host is running the latest version by inspecting the host details on the Summary screen. Fig. 21 compares the host’s summary pre and post remediation.

Figure 21 – Comparing ESXi version details pre and post remediation

This VMware KB article helps you correlate build and version numbers if needed. As per the partial table below, you can see that in our case, the ESXi host updated from 6.5 GA to 6.5.0d.

Figure 22 – Correlating ESXi version and build numbers

Vmware Product Patches


Vmware Host Patch Download Windows 7

Update Manager is a must have if you want to easily and effectively implement patch management for ESXi. Incidentally, Update Manager is one other reason why you’d want to move over to vCSA 6.5 since VUM is now embedded with this vCenter release.